Bitfrost & Njord Quick Start

Follow these steps to setup Bitfrost Gateway and Vicotee Njord sensors

Login and start Device Manager

  1. Navigate your browser to and login with your user credentials.
  2. If you haven't install Device Manager, you can click here to read more about how to install it.
  3. Start Device Manager and click on Register button. Register device


Register Gateway

Bitfrost Gateway

On the back of the Gateway, you will find an QR Code:

QR Code

To register the Gateway, you need to enter device UUID, marked with red and 4 digits secure code marked with blue. Name and description are optional, but it is easier for you to find your device by giving it a name.

Once all the fields are filled, you may click on Register button.

Example: Register Device web form
Fill out the Register Device form and click the Register button to complete the registration process.


Register Njord


The process of registering the Njord to the Cloud is the same as registering the gateway. You will find an QR Code on the back of the Njord, where you will find device UUID and 4 digits secure code. Use these numbers to register your Njord in Device Manager.


Connect Gateway to Internet

Turn on Gateway by connecting the power to the device and connect the Gateway with an RJ45 cable to your Internet router. Wait for the Gateway to connect to Vicotee Cloud Service.

Bitfrost Gateway, connecting to Internet

Two green LED (picture: marked with green circle) indicate the Gateway is connected and read.

Turn ON Njord

Press power to turn on the Njord (picture: power button is on the front of the Njord marked with red arrow).

Njord, turn on

Vicotee logo will flash until connection is established with the Gateway. It may take up to 10 minutes before Njord is paired with Gateway, measurement data will not be sent during the period.